Compact system, fast cycle time

NeoMark Easy is the solution for those looking for a compact, versatile and fast marking system. The galvo head has a fixed position and covers the entire working area, with no need for external axes to move either the board below the Laser or the Laser above the board.

The result is a much faster cycle time compared to conventional systems. These features make the NeoMark Easy system installable directly on an SMT line or configurable as an offline ‚Marking Island‘, capable of supplying pre-marked boards to the various SMT lines in the factory. The different Laser sources allow direct marking on the Solder Mask of the board or on metal and plastic components while the internal Flip Unit allows both sides of the board to be marked with a single recipe, in the same operation cycle, automatically.

The creation of working recipes (marking programmes) is done easily and intuitively, thanks to the NC2 software, developed in-house. It also features the ‚board scan‘, which allows the operator to scan the entire image of the board, and then insert the marking points directly on it, in a simple and visual way.

Key points

Laser Source
CO2
Fiber
Green

Working Area
350 x 350mm

Internal Flip Unit

Quality Check of Marked Codes

Bad Mark Recognition

MES Communication

SMEMA and HERMES Interface

Compact system, fast cycle time

NeoMark Easy is the solution for those looking for a compact, versatile and fast marking system. The galvo head has a fixed position and covers the entire working area, with no need for external axes to move either the board below the Laser or the Laser above the board. The result is a much faster cycle time compared to conventional systems. These features make the NeoMark Easy system installable directly on an SMT line or configurable as an offline ‚Marking Island‘, capable of supplying pre-marked boards to the various SMT lines in the factory.

The different Laser sources allow direct marking on the Solder Mask of the board or on metal and plastic components while the internal Flip Unit allows both sides of the board to be marked with a single recipe, in the same operation cycle, automatically.

The creation of working recipes (marking programmes) is done easily and intuitively, thanks to the NC2 software, developed in-house. It also features the ‚board scan‘, which allows the operator to scan the entire image of the board, and then insert the marking points directly on it, in a simple and visual way.

KEYPOINTS

Laser Source
CO2
Fiber
Green

Working Area
350 x 350mm

Internal Flip Unit

Quality Check of Marked Codes

Bad Mark Recognition

MES Communication

SMEMA and HERMES Interface